We deliver to anywhere in Australia. Get yours delivered with just a few Clicks
The AlcoSense Mini Breathalyser is a very simple to use, hand-held breath tester. It is a fast breathalyser, used without the need for mouthpieces, offering accuracy at a competitive price. This breathalyser features a microcomputer-controlled automatic test sequence with a 3 digit LCD display and audio cues.
The AlcoSense Mini is an improvement on the basic breathalyser as it features flow check and error sensing technology.
- invaluable in gaining an accurate result. It is light, conveniently mini-sized and is easily stored in a pocket, handbag or car glove box. The breathalyser is calibrated to the Australian standard of %BAC
1. Turning on the power To turn the unit on, press the power button. The unit will begin a start up process and automatically re-stabilize the alcohol sensor. The LCD display will undergo a countdown sequence, indicating that purge cycles and circuit tests are taking place. This process generally take 30 seconds but can last 2 minutes. The warm up process is complete once two beeps sound, the WAIT sign turns off, and 0.00 is displayed on LCD screen. 2. Blow in the unit Making sure your mouth is close to the sensor, blow a deep breath for at least 2 seconds.
3. Display
4. Retesting When "WAIT" sign on the LCD is no longer illuminated and display 0.00 on LCD , the unit is reset and ready for retesting. 5. Low battery indicator The AL 2500 lets you know when the battery is low. Sign lights at the low battery and indicates fresh batteries should be installed before retesting.
Cautions( ALKALINE BATTERY ONLY.) 1. Allow at least 15 minutes after consuming alcohol before testing. 2. Enclosed rooms with low ventilation or air conditioning may increase wait time necessary between tests. 3. Spittle or alcohol contamination of the alcohol sensor will delay reset time between tests. In the event of spittle or alcohol contamination, the unit can be shaken to ensure a quick recovery of the sensor.
12 Months Andatech Warranty
For warranty or recalibration service please visit: http://www.andatech.com.au/support-center/ or contact Andatech on 1300 800 200
Specification and package contents are subject to change without prior notice. Information contained on this page is correct at time of posting. Product information is taken directly from Andatech Official Website. Exeltek is not responsible for any errors and omissions in the information.
