Epson EH-TW3000 Home Theatre Projector (Epson Australia Warranty)
[tw3000]

Our Price: AU$2,900.00
*Sold Out

To calculate freight, please provide destination postcode:

We deliver to anywhere in Australia. Get yours delivered with just a few Clicks

Epson EH-TW3000 Home Theatre Projector

Experience true high definition digital cinema in your own home

Features:

  • Light-efficient lamp technology E-TORL
  • High Brightness
  • Crystal Clear Fine 3LCD technology
  • HDMI
  • Full 10-bit colour processing with 12-bit LCD Driver
  • Pull Down
  • Low Fan Noise
  • 1080p Full HD
  • Six-axis colour adjustment
  • Environmentally Conscious Design
  • 18000:1 High Contrast Ratio
  • Cinema Filter
  • Flexible Connectivity
  • Epson SuperWhite
  • Seven Colour Modes
  • Advanced lens and optical engine
  • Powerful lens shifting and zoom ratio
  • 2 year Epson Australia warranty

Specificaiton:

PRODUCT TYPE
 Home Theatre Projectors
PRODUCT NAME
 EH-TW3000
PRODUCT CODE
 V11H291053
PROJECTION SYSTEM
 RGB Liquid Crystal Display
PROJECTION METHOD
 Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD
 Size 0.74 inches wide D7 panel with MLA
 
 Driving method Poly-Silicon TFT Active Matrix
 
 Native resolution 1080P Full HD (1920 x 1080)
 
 Pixel number 6220800 pixels (1920 x 1080 pixels) x 3
 
 Aspect ratio 16:9
 
 Pixel arrangement Stripe
 
 Refresh Rate 50Hz or 60Hz (based on input signal)
PROJECTION LENS
 Type manual: zoom / focus
 
 F-number 2.0 - 3.17
 
 Focus length 22.5 - 47.2mm
 
 Zoom ratio 1.0:2.1
LAMP
 Type 170 W UHE E-TORL Lamp
SCREEN SIZE (PROJECTED DISTANCE)
 30 to 300 inch (0.87m to 9.03m) (Wide)
30 to 300 inch (1.88m to 19.15m) (Tele)
LENS SHIFT RANGE
 Vertical: 96.3% max. (upward & downwards)
Horizontal: 47.1% max. (Left and Right)
BRIGHTNESS
 
 High Brightness Mode 1800 lumens
Colour Mode ( Dynamic, Zoom: Wide, Lens shift: V10 / H Centre )
CONTRAST
 18000:1 ( Colour Mode: Dynamic, Zoom: Wide, Lens shift: : V10 / H Centre , Auto iris: On )
COLOUR PROCESSING
 Full 10 bit
COLOUR REPRODUCTIVITY
 Full Colour (1.07 Billion Colours)
COLOUR SPACE
 115% of NTSC
VIDEO QUALITY
 Interlace - Progressive conversion 3D Y/C separation, Noise reduction
EFFECTIVE SCANNING FREQUENCY RANGE (Digital)
PIXEL CLOCK
 13.5MHz to 150MHz
HORIZONTAL
 15 to 80KHz
VERTICAL
 50 to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL
 Brightness / Contrast / Tint / Saturation / Input signal etc.
TILT ANGLE
 0 to 2.1 degrees
KEYSTONE CORRECTION
 N/A
EPSON CINEMA FILTER
 Controlled automatically with color mode (ON: Theatre Modes / Natural, OFF: Living Room / Dynamic)
AUTO IRIS
 Controlled automatically adjusting to video source. (Available at all colour modes except x.v.Color; user selectable Off/Normal/Fast on OSD)
EPSON SUPER WHITE

Controlled automatically adjusting to video source (Available at Natural/Theatre/Theatre Black 1 and 2; user selectable ON/OFF on OSD)

2:2 Pull Down (1080p/24fps)

On/Off (Default off, HDMI & Component input)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE
 Native 1080p
 
 Resize 1280 x 1024 / 1360 x 768 / 1024 x 768 / 800 x 600 / 640 x 480
INPUT SIGNAL
 Signal type Separate signal
 
 Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm)
 
 Sync.signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL
 Video Mini D-sub 15 pin x 1 Blue molding
HDMI Ver.1.3
DISPLAY PERFORMANCE
 Native 1080p
 
 Video standard 576i / 480p / 576p / 720p / 1080i / 1080p
 
 Video signal TMDS ( Signal for HDMI)
 
 Input Terminal HDMI x 2 (HDCP)
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL
 Video standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
 
 Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL
   RCA x 3 (Red / Green / Blue)
COMPOSITE / S VIDEO
INPUT SIGNAL
 Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
 
 Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL
 S-Video Mini DIN x1
 
 Composite Video RCA (Yellow) x 1
CONTROL I/O
SERIAL I/O
 I/O terminal D-sub 9 pin x 1
 
 I/O signal RS-232c
TRIGGER OUT

Output terminal
3.5 mm mini-jack x 1
 
 Output Signal Power on: 12v DC, 200mA max Power off: 0v
LOCK FUNCTION
 Operation Lock & child-lock
OPERATING TEMPERATURE
 5°C to 35 °C (41°F to 95 °F) at 20% ~ 80% Humidity
DIRECT POWER ON
 Yes
COOL-DOWN PERIOD
 Approx 16 seconds
POWER SUPPLY VOLTAGE
 100-240 VAC ±10%, 50/60Hz
POWER CONSUMPTION
 281W (Lamp High)
DIMENSIONS
EXCLUDE FEET
 450mm(W) x 360mm(D) x 136mm(H)
MAXIMUM DIMENSION
 450mm(W) x 390mm(D) x 145mm(H)
WEIGHT
 Approx. 7.3 kg
FAN NOISE
  
HIGH BRIGHTNESS MODE
 30dB (Colour mode: Dynamic)
WHISPER MODE
 22dB (Colour mode: Theatre Black 1 and 2)
ACCESSORIES
POWER CORD
 3m
REMOTE CONTROL
 Stick type (backlight)
BATTERY
 Alkaline, AA x2 (Included)
USER'S MANUAL
 Included
LENS CAP
 Included
WARRANTY*
 2 years
* excluding lamp
  
* For more information visit Epson Projector Warranty
PRODUCT OPTIONS
Product Code
Item Code
Description
V13H010L49
 V13H010L49 Lamp
3YWTW3000
 3YWTW3000 3rd Year Warranty

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

A Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.

For warranty claim, please call Epson Australia’s Contact Centre on 1300 361 054

For information regarding Epson Projector warranty procedure, please visit: http://www.epson.com.au/warranty/projector.asp