We deliver to anywhere in Australia. Get yours delivered with just a few Clicks
Get plugged into the future! System monitoring with the Status Manager comes standard with the Fronius IG TL. This includes following features:
The Status Manager immediately reports any problems throughout the entire system thus locking in system yields for the long-term.
It also has a unique feature in which a commercially-available USB stick can be used for easy system monitoring as well as simple inverter updating.
Features
Direct signaling contact. A warning signal (e.g. indicator light or buzzer) can be activated when there are status changes via the 12 V signal output integrated into the inverter. Malfunctions are reported immediately. Night display. System information 24/7. The matrix display shows the most important information regardless of whether or not the inverter is in operation. This is made possible via the AC side power supply. For example, this enables you to access daily system data on the display even after sundown – including any status messages. Integrated Solar Net interface. Other components for system monitoring (e.g. Fronius Datalogger) can be connected directly to the inverter through the standard Solar Net interface. This enables you to easily integrate high-end system monitoring that is 100% compatible with all other Fronius IG inverters as well as the comprehensive Fronius DATCOM world. DATCOM-Slot. The DATCOM slot can be used for connecting the USB stick, optional DATCOM components as well as the direct signaling contact. It opens like a drawer providing easy access. Additional components can be connected later on as required. Service-friendly installation system. The connection area and power module are installed separately from each other. Time-consuming cabling is no longer required. When service is needed, the connector remains on the wall and the DATCOM slot remains onsite – all settings and configurations remain untouched. The standard string monitoring system checks the current of up to 6 strings.
String malfunction detection. The inverter continually compares the string currents of connected strings with each other. This enables the early detection of problems in the entire system (e.g. gnawing damage to cables from small animals, module failure, etc.). This can help to prevent an incremental loss of earnings.
Detailed status codes. Should any problems occur in the system, comprehensive and precise service codes are displayed. This makes it easier to isolate the exact source of the error and saves valuable time for fault diagnostics and correction. The highest efficiency via the Module Manager. Whoever can always remain at the maximum power point (MPP), can get the most out of each ray of light. This is the job of the Fronius Module Manager with its accurate MPP tracking. Easy data exchange via USB. A commercially-available USB stick that can be inserted into the inverter collects data during operation. System information can then be moved to a PC at any time and then analyzed and archived using Fronius Solar.access software. Timeconsuming cabling is no longer required. Simply pull out the DATCOM slot, remove the USB stick and load the data to your PC. Completely heat and dust-free ventilation concept. The well-thought-out ventilation concept precludes overheating or contamination. The device body is hermetically sealed. Only the cooling fins for the electronics remain on the outside. The electronicsare air-cooled. The temperature-controlled fan circulates outside air through the cooling fins as required. This ensures that the inside of the device remains significantly cooler and that there is absolutely no exchange between inside and outside air.
